Phonak 4.0 SDS Retention Locks – For Marvel, Paradise, Lumity and Life (10 Pack)

SKU Phonak-4.0-R-Locks Categories ,

Phonak 4.0 SDS Retention Locks are a fantastic addition to compatible hearing aids. These handy accessories hook onto the end of your Phonak 4.0 receiver wire, and loop around into your ear to retain the hearing aid within your ear to stop it from falling out.

To select the right retention lock, just check on your current Phonak 4.0 Receiver for the power level: Standard (S), Medium (M) or Power (P)

Phonak retention locks give great peace-of-mind and allows you stop worrying about losing your investment!

Hear Care Direct are an authorized Phonak distributor

Got a Question? Send us an email >

$14.49

Description

Compatibility:

The Phonak 4.0 SDS Retention Locks are compatible with Phonak 4.0 Receiver Wires, that are compatible with a wide range of Phonak hearing aids including, but not limited to, Phonak Marvel, Paradise, Lumity and Life. Please note, these are not compatible with the older Phonak xReceiver Receiver Wires, these will need the Phonak xReceiver Retention Locks.

How to Identify the Correct Size:

You will need to select the same size Retention Locks as the Power of your current receiver. For example, if you use a Medium Power Receiver, you will need ‘Medium’ Retention Locks.

If you are unsure on what power receiver you are using, you will need to remove the dome off the end of the receiver. Where the dome usually sits on the receiver body, there will be a number and letter on one side, for example ‘2M’. The ‘2’ indicates the size/length of the receiver wire, and the ‘M’ stands for Medium Power! The powers available are ‘Standard’ (S) ‘Medium’ (M) and ‘Power’ (P).

If you are unsure on which retention locks you require, please do get in contact with us at support@hearcaredirect.com

Features:

  1. Enhanced Retention: The Phonak 4.0 SDS Retention Locks are designed to keep your hearing aids in your ears at all time, so you don’t have to worry about losing a much needed investment!
  2. Immense Comfort: The Phonak 4.0 SDS Retention Locks aren’t just designed to keep your hearing aids in your ears, they are made for comfort, too. You won’t even realise you have the Retention Locks attached!
  3. Easy to Use: These Phonak 4.0 SDS Retention Locks are incredibly straight forward to fit, even if you suffer with poor dexterity! If when you receive your Phonak 4.0 SDS Retention Locks, they are a bit stiff and difficult to get on, this is usually due to them getting cold whilst in transit and the plastic stiffening up. If this happens, just pop the Phonak 4.0 SDS Retention Locks somewhere warm for 10 minutes and they should be malleable after that!

Benefits:

  1. Extra Safety: We are well aware of how expensive hearing aids can be, so you can wear your hearing aids now without the worry of losing your investment!
  2. Discreet Design: With the way the Phonak 4.0 SDS Retention Locks attach to the receiver wire, they are basically invisible once in the ear.

FAQ’s

No. Please check our compatibility section for more details.
Yes. You do not need an audiologist to fit them for you, as the just slide over the end of the receiver wire. You will need to remove your domes before fitting!
You will know when they need changing as the plastic gets brittle and hard over time. Once this begins to happen, it is time to change to a new Sports Lock! There is no set time on this, as it can vary due to lots of different factors. If you live somewhere colder, you will most likely have to change them more often.

Delivery

Order today by 10am (EST) for same day dispatch.

Free Express Delivery (3-6 working days) for orders over $199

Standard Delivery under $199 is $4.95 within 7 – 10 working days
Fast Shipping under $199 is $12.95 within 3 – 6 working days

Additional information

Compatibility

Phonak Life, Phonak Lumity, Phonak Marvel, Phonak Paradise

Brand

Phonak

Power

Standard, Medium, Power

Compatible Accessories

Phonak 4.0 Receivers

Other Products You Might Be Interested In..